Tremron Driveway & Pavers Nationwide

Tremron Driveway & Pavers: The Campbell Owner’s Guide

We stock and install Tremron-compatible driveway and paver systems in Campbell, with paver driveway installation typically running $7,000-$18,000 and concrete driveway installation at $4,500-$12,000 depending on substrate condition and pattern complexity. Most Tremron paver repairs we handle in Campbell are quoted within 24 hours and scheduled within a few business days, not weeks. Homeowners usually notice the problem first as settling along the garage threshold, weed growth between stones that weren’t there last season, or a hollow sound when they walk across what used to be a solid surface.

Call (831) 704-1211

Which Tremron Models This Applies To

Tremron’s product lines span several series that appear regularly in Campbell installations from the 2010s forward. The Aurora Stone series, Olde Towne cobble-style pavers, and Sierra textured finishes are the three we encounter most often in the South Bay. To identify your series, check for a Tremron stamp on the paver edge or underside, or measure the unit itself: Aurora Stone runs 2-3/8″ thick in 6×6, 6×9, and 6×12 modular sizes, while Olde Towne is thicker at 2-3/4″ with a tumbled edge profile that sits proud of the bedding course.

The compatibility gotcha in Campbell’s clay-heavy soil is base depth, not paver model. Tremron specs call for 6-8 inches of compacted aggregate base in residential driveways, but we’ve pulled up failed installations near the Pruneyard Shopping Center area where 3 inches was all that sat between the bedding sand and native soil. That gap between spec and field condition is what drives most of the callbacks we see. We source OEM Tremron replacements through authorized distributors, though for discontinued color runs we sometimes match to equivalent-grade Belgard or Techo-Bloc units when the customer prefers consistency over exact match.

Signs Your Tremron Driveway & Pavers Is Failing

• Sinking or tilting along the garage slab edge. This usually means the edge restraint has failed or the base material has washed out beneath the bedding course. In Campbell, where winter rains hit compacted clay that doesn’t percolate well, water finds the path of least resistance and carries fines out from under your pavers.
• Weeds or moss growing thick between joints. Polymeric sand breaks down after 5-8 years in our UV exposure and freeze-thaw cycles. Once the binder degrades, organic material fills the gap and holds moisture against the bedding layer.
• Hollow sound or rocking underfoot. This indicates a void beneath the paver, either from inadequate initial compaction or from rodents burrowing in the base layer. We’ve found gopher tunnels under Tremron patios near Los Gatos Creek Trail more than once.
• Chipped corners or spalling surface texture. Tremron’s surface hardening is good but not infinite; repeated impact from metal-edged snow shovels or pressure-washer abuse at close range will expose the aggregate body beneath the color layer.
• Efflorescence that returns after cleaning. White mineral bloom on the surface means moisture is moving through the paver body from below, carrying soluble salts. Persistent efflorescence points to drainage failure, not a surface problem.

Before

After

Replacement Cost & What’s Included

For Campbell properties, partial Tremron paver replacement where we’re addressing a failed section runs $2,500-$6,500 depending on how many square feet need lifting, whether the base requires reconstruction, and whether the original color is still in production. Full driveway replacement with new Tremron or equivalent-grade material falls in our standard $7,000-$18,000 paver driveway installation range.

Every quote we write breaks out line items: demolition and disposal, base material and compaction, bedding sand, pavers by the square foot, edge restraint, polymeric sand, and sealant if requested. Under Clause 1 of the Haven Standard, that written price is fixed before we start; no change order moves forward unsigned. Our paver work carries the 365-Day Done Right Promise, and you receive a documented photo record of substrate condition before and after as standard deliverable.

DIY or Call Us?

What you can safely check yourself: lift one paver at the failure edge with a flat pry bar and photograph what’s underneath. If you see sand sitting directly on dirt with no crushed stone layer, you’ve found the problem. You can also verify whether your edge restraint is still mechanically secured or has pulled away from the perimeter.

Where DIY goes wrong: base reconstruction requires plate compaction in lifts, precise grading for drainage away from the foundation, and edge restraint anchoring that most homeowners don’t have the tools to install correctly. We’ve been called to Campbell jobs where the owner relayed pavers over the same failed base and watched them settle again within a single rainy season. For a permanent fix, call (831) 704-1211 and we’ll scope it properly.

FAQs