A Rowan company - serving Campbell, CA

CertainTeed Home Additions & ADU Nationwide

Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

Your dream remodel for as low as $199/month*on approved credit; ask for current terms
Styles & brands we work with

Kitchen remodeling
Kitchen remodeling
Bathroom remodeling
Bathroom remodeling
Home additions & ADU
Home additions & ADU
Roofing
Roofing
Windows & doors
Windows & doors
Driveway & pavers
Driveway & pavers
Fence
Fence

Before & after – our own jobs

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

CertainTeed Home Additions & ADU: The Campbell Owner’s Guide

We stock and install CertainTeed-compatible components for home additions and ADU projects throughout Campbell, with typical installed costs running $45,000-$130,000 for additions and $90,000-$220,000 for detached ADUs. Most Campbell homeowners who call us have already spotted a problem: a CertainTeed siding panel that’s warped near the Pruneyard area’s afternoon sun exposure, or a CertainTeed roofing shingle that’s lost granules after a wet Santa Clara County winter. We carry the matching CertainTeed inventory on our trucks and can usually source same-day what we don’t stock, because we’ve learned that a failing exterior envelope on an addition doesn’t wait for a two-week delivery window.

Call (831) 704-1211

Which CertainTeed Models This Applies To

CertainTeed’s product lines for additions and ADUs break into three categories we see regularly in Campbell: the Landmark and Landmark PRO shingle series for roof tie-ins, the MainStreet and Monogram vinyl siding lines for exterior walls, and the Cedar Impressions composite shake for gable accents. The model number lives on the nailing strip of shingles and inside the lock-tab of siding panels, stamped in ink that fades after about eight years of Campbell’s UV exposure. If you can’t read it, measure the exposure height: MainStreet sits at 4 inches, Monogram at 5 inches, and Cedar Impressions at 8.5 inches. We match to OEM CertainTeed when the color is still in production, which for Campbell’s common Terra Bronze and Heather Blend runs about twelve years from introduction. After that, we source from CertainTeed’s close-match archive or recommend a full-wall reskin if the fade line would show at the addition junction.

Aftermarket equivalents exist for siding substrate but not for shingle granule color matching, and we’ve found the color drift on third-party shingles hits visible mismatch in Campbell’s direct sun within three seasons. We document the OEM batch code on every CertainTeed order so the homeowner has a record if a future claim arises.

Signs Your CertainTeed Home Additions & ADU Is Failing

Contractor applying mortar to kitchen wall for tile installation
Signs Your CertainTeed Home Additions & ADU Is Failing
  • Buckling or rippling in siding panels, especially on south-facing walls. Campbell’s combination of thermal cycling and afternoon sun causes the PVC substrate to expand beyond the nailing hem’s relief slot capacity. We see this most in West Campbell additions built 2012-2018, where the original installer likely face-nailed too tight.
  • Granule loss on shingle tie-ins exposing the asphalt mat. The Landmark series sheds granules faster when the attic ventilation below the addition was undersized, a common issue in garage conversions where the original gable vent got covered. The mat turns gray and feels gritty underfoot if you check from a ladder.
  • Corner posts pulling away from the wall, creating a gap at the J-channel. This is expansion stress concentrated at the least flexible point, usually because the installer didn’t leave the manufacturer’s specified 1/4-inch expansion gap at the top of the post. Campbell’s clay-heavy soil adds foundation micro-movement that accelerates the pull.
  • Water staining on interior drywall at the addition roof-wall junction. On CertainTeed shingle tie-ins, this often traces to step flashing that was counterflashed with caulk instead of metal, a shortcut that fails when Campbell’s winter rains sit against the wall for days. The stain pattern is diagonal, following the shingle courses.
  • Soft spots in Cedar Impressions panels near ground level. The composite material resists moisture but not standing water, and Campbell’s irrigation overspray against the foundation is the usual culprit. The panel feels spongy and the grain pattern swells smooth.
BeforeBefore
AfterAfter

Replacement Cost & What’s Included

Component Campbell Installed Range What’s Included
CertainTeed siding panel replacement (partial wall, up to 200 sq ft) $2,800-$6,500 Matching panels, housewrap inspection, corrosion-resistant fasteners, J-channel and corner post as needed, disposal
Landmark shingle tie-in repair (up to 3 squares) $1,200-$3,400 OEM shingles, ice-and-water shield at valley/wall, step flashing replacement, attic ventilation check
Cedar Impressions accent panel replacement $3,500-$8,000 Composite panels, starter strip, color-matched ridge cap, substrate repair if moisture-damaged
Full addition exterior reskin (CertainTeed system) $18,000-$42,000 Complete tear-off, WRB replacement, siding, trim, soffit, fascia, permit, final inspection

The range driver is always what’s underneath. We don’t know if the OSB sheathing is sound until we pull the first panel, which is why our written quote includes a line-item allowance for substrate repair at $4.50-$7.00 per square foot if needed. Under Clause 1 of the Haven Standard, that number is in writing before we start, and any change requires your signature on a change order. No exceptions since 2007. Our workmanship on CertainTeed installations carries the 365-Day Done Right Promise: if it is not done right, we make it right.

DIY or Call Us?

Two contractors installing custom kitchen wall cabinets during a home renovation.
DIY or Call Us?

There’s a safe middle ground for Campbell homeowners. You can walk the perimeter with binoculars and note which panels show distortion, or check the gutter downspout for granule accumulation that signals shingle wear. What you shouldn’t do is remove a CertainTeed siding panel yourself, the locking mechanism is designed for one-direction release with a zip tool, and prying from the face cracks the nailing hem and voids the wind warranty. For shingle tie-ins, the fall risk on a single-story addition roof is real, and the step flashing detail at the wall is where most leaks start; we’ve re-done three Campbell jobs this year where the homeowner’s patch lasted one rainy season. If you’re seeing any of the five symptoms above, call (831) 704-1211 and we’ll schedule a free estimate with a written price before any work starts. We bring the documented photo record, the matching CertainTeed inventory, and the permit knowledge for Campbell’s specific setback and height requirements.

Get the price in writing before anything starts.A real person answers, day or night.
Call now

FAQs

Need Construction help in Campbell? Licensed & insured · Free on-site estimates response · free estimates
Call (831) 704-1211
Local Service Coverage

Request a Free Estimate in Campbell

Tell us what you need - Rowan Construction Group Campbell responds fast. No obligation.

When you submit this form, you confirm you have read our Privacy Policy and agree that you may be contacted via phone, email, or SMS about your request, including by the independent contractors we may refer it to.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch