Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterCabinet Installation & Refacing in Campbell, CA
Cabinet installation and refacing in Campbell, CA typically runs between $3,500 and $22,000 depending on kitchen size, material choice, and whether you’re replacing boxes entirely or updating existing ones with new doors, drawer fronts, and veneer. Most Campbell homeowners who aren’t moving walls see the job completed in three to seven business days. At Rowan Construction Group, every project starts with a flat written price and a written scope – before anyone touches a hinge or a cabinet box.
If your kitchen feels dated but the Kitchen Design & Layout still works, cabinet work is usually where the money makes the most sense. New cabinet runs change storage, sightlines, and finish in one trade. Refacing – replacing the doors, drawer fronts, and applying matching veneer to the face frames – costs roughly 40 to 60 percent less than full replacement and is the smarter call when your existing boxes are plumb, square, and dry. Grant Rowan has been walking Campbell kitchens through exactly this decision since 2007, and the answer is never the same twice.
This page sits within our broader Kitchen Remodeling in Campbell service, which covers countertops, layout changes, flooring, and fixture work alongside cabinets. If you’re weighing a larger scope, that page has pricing and process details for the whole trade. For cabinet work specifically, call us at (831) 704-1211 – a live person picks up, and we’ll schedule a site visit with a written estimate at no charge.
When You Need Cabinet Installation & Refacing
- Doors that sag, stick, or won’t close flush. In Campbell’s older ranch homes – particularly in the Orchard City and Dry Creek neighborhoods – original cabinet hardware from the 1970s and 1980s wears to the point where adjustment alone won’t hold. When the hinge cups start pulling out of the wood, that’s a box-level conversation.
- Interior box damage from moisture or pests. Campbell sits at the base of the Santa Cruz Mountains, and kitchens on the west-facing side of properties can see seasonal condensation work into particleboard shelving. Soft spots, swelling, and delamination mean the box itself needs replacement, not just new faces.
- A dated finish that doesn’t match a recent countertop upgrade. A Cambria quartz countertop against honey-oak cabinet doors from 1994 is one of the more common calls we get. Refacing the doors and applying a painted or wood-veneer finish to the face frames closes that gap without touching the boxes.
- Storage that doesn’t work for the household anymore. Full cabinet installation lets us reconfigure the run entirely – pull-out shelves, deeper drawers for pots, a proper lazy Susan in a corner that currently loses everything. Refacing keeps the existing footprint; installation changes it.
- A kitchen renovation where cabinets are the final phase. Some Campbell homeowners complete countertops or flooring first and come back to cabinets. We coordinate sequencing so cabinet installation happens after flooring protection is in place and before backsplash tile is set.
- Preparing a home for sale in a competitive Campbell market. Updated cabinet faces and hardware consistently rank among the highest-return cosmetic upgrades in Santa Clara County. Refacing at $5,000 to $9,000 often photographs better than a $30,000 gut remodel to a buyer scrolling listings.
Our Cabinet Installation & Refacing Process
- Written estimate and scope confirmation. A Rowan crew member visits your Campbell home, measures every run, photographs existing conditions, and documents the substrate – meaning the wall material behind the cabinets, the floor level, and the plumb of existing boxes. You receive a flat written price before any work is scheduled. Under Clause 1 of the Haven Standard, that price is the price. If scope changes after you’ve signed, no work proceeds on the change until a signed change order is in hand.
- Material selection and order confirmation. We work with KraftMaid and Wellborn as our primary cabinet lines, both of which offer in-stock and semi-custom lead times. You’ll choose door style, finish, and hardware at this stage, and we confirm the order in writing with lead time and delivery date. No work starts until materials are confirmed on order – we don’t schedule demo around a verbal commitment from a supplier.
- Existing cabinet assessment and demo. For full installation, we remove existing cabinets and document the wall condition with photos before framing or blocking work begins. For refacing, we inspect each box for square, level, and moisture damage before stripping doors and drawer fronts. Any box-level issues found during this step are documented in writing and reviewed with you before we proceed – not buried in the final invoice.
- Installation or refacing work. Full installation involves securing upper cabinets to wall studs first, then setting base cabinets on a level reference line – a step where getting the floor’s high point wrong by a quarter inch means shimming problems all the way down the run. For refacing, face-frame veneer is applied, doors are hung, drawer fronts are aligned, and hardware is set. Both processes end with interior shelf installation and a full alignment check on every door and drawer.
- Punch list and photo documentation. Before our crew leaves, we walk the finished work with you item by item. Every visit includes a documented photo record of the completed installation – not a stock image, but photos of your actual kitchen, delivered to you as a standard part of the project file.
- 365-Day Done Right Promise. If anything is not right – a door that develops a gap, a drawer that stops tracking – call us. The 365-Day Done Right Promise is printed on every project agreement and backed by the Haven Standard’s terms page, not an asterisk in small type.
Before
AfterCabinet Installation & Refacing Pricing in Campbell
Cabinet work in Campbell ranges widely based on three variables: whether you’re replacing boxes or refacing them, the linear footage of your kitchen run, and the cabinet line you select. Here are honest ranges based on what we quote in this market.
| Scope | Typical Range (Campbell, CA) | What Drives the Number |
|---|---|---|
| Cabinet refacing only (doors, drawer fronts, veneer) | $3,500 – $9,500 | Linear footage, door style, finish type (paint vs. wood veneer) |
| Semi-custom cabinet installation (stock to semi-custom lines) | $8,000 – $16,000 | Kitchen size, number of specialty units (corner, tall pantry), hardware |
| Full custom cabinet installation | $15,000 – $22,000+ | Custom sizing, wood species, built-in organizational inserts |
| Hardware replacement only (pulls, knobs, hinges) | $400 – $1,200 | Number of pieces, hole-drilling requirements for new pull spacing |
A few factors specific to Campbell kitchens that move these numbers: older homes in the Dry Creek area sometimes have non-standard stud spacing or plaster-over-lath walls that require additional blocking before upper cabinets can be secured properly – that blocking work adds $300 to $700 to a typical quote. Homes built in Campbell’s post-war residential tracts often have soffits above the upper cabinets; if you want to remove the soffit and run cabinets to the ceiling, that’s a separate scope with its own line item. We document these conditions during the estimate visit so the written price reflects what we actually found, not a best-case assumption.
Santa Clara County does not typically require a building permit for cabinet refacing or like-for-like cabinet replacement. Permit requirements do apply when cabinet work is part of a larger Full Kitchen Remodeling project that includes electrical, plumbing, or structural changes. We’ll tell you in the written scope whether a permit applies to your project.
Estimates are free. Call (831) 704-1211 to schedule yours, or bring a competitor’s written quote – we’ll review it line by line at no charge as part of our Free Second Opinion offer.
Key Takeaways
- Refacing costs 40 to 60 percent less than full replacement and makes sense when existing boxes are structurally sound.
- Campbell-area pricing runs $3,500 to $22,000 depending on scope, linear footage, and cabinet line.
- No permit is typically required for cabinet-only work in Campbell, though it may apply in a full remodel.
- Rowan provides a flat written price before work starts, a documented photo record when work ends, and a 365-Day Done Right Promise in between.
- KraftMaid and Wellborn are our primary cabinet lines – both offer semi-custom lead times that fit most Campbell project schedules.
FAQs – Cabinet Installation & Refacing
How much does cabinet refacing cost in Campbell, CA?
Cabinets & Countertops refacing in Campbell typically costs between $3,500 and $9,500 for a standard kitchen run, covering new doors, drawer fronts, and veneer applied to existing face frames. The number varies with linear footage and finish type – a painted finish generally runs less than a real-wood veneer in a matching species. That range assumes existing boxes are square and dry; if we find moisture damage or structural issues during the estimate visit, we’ll document them and give you a revised written number before any demo begins. Call (831) 704-1211 for a free on-site estimate – we’ll measure and price your specific kitchen, not a generic one.
Is it cheaper to reface or replace cabinets?
Refacing is almost always cheaper – typically 40 to 60 percent less than full cabinet replacement for the same kitchen footprint. Refacing is the right call when your existing cabinet boxes are plumb, level, and dry, and you’re satisfied with the current layout. Replacement makes more sense when boxes are water-damaged, when you want to change the layout or add linear footage, or when the existing construction is too worn to hold new hardware reliably. During a site visit in Campbell, we assess each box individually and document what we find – you’ll know which option makes sense for your kitchen before we write the price.
How long does cabinet installation take in Campbell?
Most Campbell cabinet projects run three to seven business days from the start of installation. Refacing a standard 15- to 20-linear-foot kitchen typically takes two to four days. Full cabinet installation on the same footprint runs four to seven days, with additional time if blocking, soffit work, or non-standard wall conditions are involved. Lead time for materials – generally two to four weeks for KraftMaid and Wellborn semi-custom lines – is the longer part of the calendar, and we confirm the delivery date in writing before scheduling the installation crew. We don’t start demo until materials are confirmed on-site or within a confirmed delivery window.
Do I need a permit for cabinet work in Campbell?
Cabinet refacing and like-for-like cabinet replacement generally don’t require a permit from the City of Campbell. A permit is required when cabinet work is part of a broader kitchen remodel that includes moving electrical circuits, relocating plumbing, or altering walls. If your project includes any of those trades alongside cabinets, we’ll note the permit requirement in the written scope and include permit procurement as a line item – not a surprise after work starts. If you’re unsure where your project lands, the free estimate visit is the right place to find out.
Why Campbell Homeowners Work With Rowan
Rowan Construction Group has been quoting and completing kitchen work in Campbell since 2007. Across more than 4,000 projects, the process hasn’t changed: a written price before work starts, a signed change order before any scope change, and a documented photo record when the crew leaves. That discipline is the reason projects finish within a few percent of the agreed number – not because surprises don’t happen, but because the process catches them before they become invoice disputes.
Our cabinet work is part of a broader Kitchen Remodeling practice that covers countertops, flooring, and fixture coordination. If your project touches more than one trade, we can scope and price the full sequence in a single written estimate so the phases don’t conflict. Grant Rowan reviews every written estimate before it goes to a customer – that’s not a process step we delegate.
Background-checked, uniformed crews. A live person answering calls around the clock. A free second opinion on any written estimate you’ve already received. And a 365-Day Done Right Promise that’s printed on the project agreement, not referenced in a footer.
To get a flat written price for cabinet installation or refacing in Campbell, call (831) 704-1211. The estimate is free, the price is in writing, and the scope is documented before anyone picks up a tool.
Written by Grant Rowan, Owner at Rowan Construction Group Campbell, serving Campbell.